Designed for #4 or #5 Rebar with 3″ Clearance
2-BAR Footing Stand
Explore the Strength of 2-BAR Footing Stands
The #928 Hercules 2-Bar Footing Stand is designed for 2 bar applications using #4 and #5 rebar. Each bar is positioned 5″ apart with a 3″ clearance from the ground. The #928 is strong and will not collapse during the pour. Simply snap the rebar into place. No wire tying is necessary. The rebar is kept at the correct height in the footer and will help you “get the job done right!”
Save Time
Over traditional rebar tying
Maximum Concrete Flow
For an easier installation
High Strength
Easily move throughout your project
2-BAR Footing Stand estimator
2-Bar Footing Stand Placement & Usage
For our 2-Bar Footing Stands, we recommend placing a stand every 4 feet. Simply snap the reinforcement into the clips, and you are finished. No wire tying needed. Our footing stands ensure the reinforcement stays in the right place before, during, and after the concrete pour.
Buy Rebar Footing Stands
Strength. Quality. SOLUTION.
Get your 2-Bar Footing Stands and accessories easily through our nationwide retail stores, major online retailers, or directly on Amazon. For a quick guide on where to find these products, just click “Where To Buy” to see all your purchasing options.
2-BAR Footing Stand
Frequently Asked Questions.
Do our chairs get buried in the concrete or get taken out during the pour?
Buried
What spacing between stands is recommended?
What is the overall height of the chair?
3-7/8″