Designed for 6, 8, and 10 Gauge Steel Wire

2″ Steel Mesh Chair

2″ Steel Mesh Chair For Unrivaled Performance

The Hercules 2″ Steel Mesh Chair is perfect for Patios, Sidewalks, Driveways, Garages, and many other concrete applications. Designed for 6, 8, and 10 Gauge Steel Wire, the Hercules 2″ Steel Mesh Chair allows concrete to flow freely underneath the Mesh. This is the ultimate solution to help you “get the job done right!”

All Products

Save Time

Over traditional rebar tying

Maximum Concrete Flow

For an easier installation

High Strength

Easily move throughout your project

2″ Steel Mesh Chair estimator

Chairs Required

Total Square Footage:


sq. feet

(If placed every 24 inches):

Boxes Required (50 chairs per box):

Boxes Required (100 chairs per box):

2″ Steel Mesh chair Placement & Usage

For our 2″ Steel Mesh Chair, we recommend placing a chair every 24″ in each direction. Simply pull the mesh up off the ground and snap the chair’s clips onto the mesh’s wire crossing from the bottom.
The 24″ spacing allows one to walk on the mesh between the chairs. The mesh will fall to the ground when walked on, but spring back up into place when stepped off. Our Steel Mesh chairs ensure the mesh stays in the right place before, during, and after the concrete pour.

Buy Steel Mesh Chairs

Strength. Quality. SOLUTION.

Get your 2″ Hercules Rebar Mesh Chairs and accessories easily through our nationwide retail stores, major online retailers, or directly on Amazon. For a quick guide on where to find these products, just click “Where To Buy” to see all your purchasing options.

2″ Steel Mesh Chair

Frequently Asked Questions.

Do our chairs get buried in the concrete or get taken out during the pour?


Can our chairs be used for any steel mesh wire size?
Our chairs can be used with 6-, 8-, & 10-gauge wire.
What is the recommended spacing?
We recommend placing a chair every 24” in each direction.
What is the overall height of the chair?